Commentaires pour « Square-Cut™ »

Simple design, excellent results.

I applaud the simplicity and function of this tool. Easy to set up and increased safety by keeping your hand away from the blade.


James Crawford

January 10, 2020

Best tool for the money in my opinion

Just follow the instructions and you can get as close to production cross cuts every time. I have used it on deck boards, 1x4, 1x6, 1x8 and a number of 2xs. No problem with the gripper tabs yet. They hold well but they could be bigger.


Jim Laudate

November 17, 2018

Works Great: if you respect yourself

This thing works like a dream and couldn't be better especially at the price. I suggest owning a real circular saw if you want better results. Cryobi P506 users need not apply.


James Kent

August 18, 2018

A bit to light weight

Personally I would have liked to see the main part made from aluminum with the guide still plastic. It would give it some weight, it's a bit too flimsy. Instead of little pads that keep coming off bigger pads would have been better I think. Works okay. Could be better.


Jeffery Seiffert

November 27, 2017

Square cut

I have 2 of these and I would not be without one. The reason I have 2 is because I have 2 different sizes of saws and I have one for each saw.


Dennis Baker

September 13, 2017

Works great on my Ryobi saw, after a trim.

By default the arm is a little too long for the left mount blade on my Ryobi cordless saw. So I adjust the arm all the way in, lined it up on a 2x4 and with a finishing blade, trimmed the end of the arm on the Square-Cut. Worked great and now I can make really accurate square cuts anywhere.


William Kapes

December 21, 2016

Doesn't work with Ryobi 18v cordless circular saw P506

I agree with Alex Qian. The adjustable arm sticks out a tad bit too much even at the shortest setting when used with the Ryobi P506.


Lester Sakamoto

August 3, 2016

Doesn't work with Ryobi P506

The adjustable arm is too long for the Ryobi P506! Unless I'm doing something wrong.


Alex Qian

May 31, 2015

Great idea!

Bought this based on my experience with the KREG Pocket Hole Joint System. Tool and design are great and really saves time. Fast to calibrate and use. Replaces my large Speed Square and as an added bonus, automatically sets the kerf on the piece i am cutting.


Dorald Keefer

May 7, 2015

Doesn't work with *all* saws

While the idea behind this device is sound, it doesn't work with all circular saws. My Porter Cable 20v cordless has the motor on the other side - the right - of the blade, so it is not possible to position the Square Cut so it will work. I will use it with my jig saw, though, so it isn't a total loss. If I acquire another circular saw, with the motor to the left of the blade, I am sure it will be a useful tool for making cross-cuts.


James Fraser-Paige

March 18, 2015

This website uses first party and third party cookies to improve your experience and anonymously track site visits. By visiting this website, you opt-in to the use of cookies. OK