Accu-Cut™

Évaluation moyenne (18):
     

Nouveau

Réalisez facilement des coupes droites, précises et sans éclats

  • Réalisez des coupes, des coupes transversales et des coupes angulaires ayant jusqu' à 1220 mm (48") de long sur les contreplaqués, MDF et panneaux
  • Alignez le rail de guidage avec vos repères pour effectuer des coupes précises
  • Fixez le rail sans colliers de serrage grâce à des bandes de guidage antidérapantes
  • Évitez les éclats grâce à des bandes de pare éclat qui maintiennent le matériau pendant la coupe
  • Commencez à couper facilement avec un bloc de départ qui supporte la scie et permet le fonctionnement normal du protège-lame
  • Le chariot universel accepte presque toutes les scies circulaires - lame à gauche ou à droite
  • Le chariot universel est compatible avec le Kreg Rip-Cut™
  • Exploitez votre scie sans avoir besoin de déplacer la pièce que vous coupez
  • Regardez comment dépiécer de grands panneaux avec l'Accu-Cut et le Rip-Cut

$79.99 USD

N° ARTICLE : KMA2700

Ajouter au panier

Description

Transformez votre scie circulaire en un système de coupe de haute performance guidé par des rails

Démarrez vos projets en réalisant des coupes droites, précises et sans éclats avec votre scie circulaire et le système de rail de guidage de l'Accu-Cut™ Faites des coupes (transversales ou angulaires) ayant jusqu'à 1220 mm (48") de large sur les feuilles de contreplaqué, MDF et autres grands panneaux, avec une configuration très simple, une bonne précision et un excellent contrôle.

L'Accu-Cut guide la scie circulaire le long d'un rail en aluminium qui permet à la scie de se déplacer aisément suivant une ligne droite. La conception de l'Accu-Cut™ simplifie le réglage en alignant simplement le rail sur la ligne de coupe. Grâce à la double bande de guidage, il n'est pas nécessaire d'utiliser des colliers de serrage pour maintenir le rail en place. Ces bandes possèdent un revêtement antidérapant pour prévenir le glissement et un dispositif de pare éclat pour éviter les éclats. De plus, le rail permet de réaliser facilement des coupes droites sur des pièces dont le bord n'est pas droit et plat.

Les scies circulaires n'ont pas de guides appropriés qui les maintiennent alignées le long de la ligne de coupe. En plus, il peut être difficile de voir la trajectoire de coupe de la lame. À cause de ces deux faits, il est difficile de garder la scie sur la coupe désirée. Les scies circulaires provoquent aussi souvent les éclats des placages extérieurs. L'Accu-Cut™ résout ces problèmes. En plus, il est portable, ce qui permet de couper la pièce avec précision sans la déplacer, au lieu de manier de lourds panneaux sur la table à scie. 

L'Accu-Cut™ est intuitif et facile à utiliser pour les novices, mais très robuste pour les professionnels. C'est aussi l'outil idéal pour les utilisateurs moins expérimentés, car il élimine le besoin de garder la scie droite et de la guider manuellement le long de la ligne de coupe. L'Accu-Cut™ augmente aussi la rapidité et le rendement des professionnels, car il permet de réaliser rapidement et facilement une grande variété de coupes en atelier et sur le chantier.

Différence entre l'Accu-Cut et le Rip-Cut

Comment dépiécer de grands panneaux avec l'Accu-Cut™ et le Rip-Cut™

Utiliser le chariot du Rip-Cut avec l'Accu-Cut

Comment utiliser le chariot universel de l'Accu-Cut™ avec le Rip-Cut™

Spécifications

Rail de guidage

Aluminium de qualité aéronautique avec deux bandes de guidage antidérapantes et pare éclat 

Chariot de la scie

Accepte les scies à lame gauche et droite
Butée de position et curseur de précision intégrés

Longueur de coupe

1220 mm (48") maximum

Inclut

(1) Chariot universel, (2) Rails de guidage en aluminium de 673 mm (26,5"), (2) Raccordements de rails (1) Bloc de départ, (1) Pince d'indicateur de rail, instructions détaillées d'installation et d'utilisation

Manuel Manuel de l’Amérique du Nord

Évaluations pour l'" Accu-Cut™ "

Évaluation moyenne :
     

Good but not great

Good but not great. As mentioned by other reviewers (on Amazon) there is "play between the sled and the track (enough to change the angle between the blade and the track at least a couple degrees)" This effects the accuracy and reproducibility of the cut. I typically found a 0.5mm to 2mm variation along the length of the cut. This movement also causes excessive wear of the blue anti-slip/anti-chip strips. Every time I made a cut I would notice a few small blue chips of plastic. Another issue was with saw compatibility. I was unable to use my Milwaukee 2630-20 cordless saw as the base was to narrow. I had to use my corded Makita 5007GK instead. If you are cutting down sheet goods to finish off on a table saw the Kreg Accu cut is fine .If you need a high degree of accuracy you may want to look elsewhere. On a positive note the non slip strips are extremely effective at no time did I feel the need to clamp down the wood that I was cutting.

     

By Phillip Baertschi

September 22, 2017

Looking to Upgrade/Add To

I currently own the Rip-Cut and enjoy using it for what it can do. I like the idea that the Accu-Cut is able to be used in different ways, including freehand. Is the Accu-Cut available without the sled, since I already have it with my Rip-Cut?

     

By Dana Reynolds

August 22, 2017

Absolutely great for weekend project within 1/32

I bought this unit to build a toolchest using 1/2" baltic birch plywood. I had to rip 4'x8' to rip apart. I made my cutting plan so I only had to cut on the 48" side PROS As precise as your marking and measuring tape. I achieved all my cuts within a 1/32" margin. Extraordinary price/quality ratio. Can't ask for more. The anti-skid works flawlessly. You do not have to fix the track to the piece. Lay it down, push the saw, that's it ! The track has a starting entry point which is away from your material so you can lay the saw on the track way before you hit the piece. It helped me to get confident. CONS Takes some patience to properly setup. For those of you who do not want to take your time and has to be working perfectly straight out of the box: there is festool track saw at a 1000$ for you. The attaching base could benefit of an improved method to securely attach the saw. However, once my DeWalt cordlees saw was attached to it, it did not move for the 30 cuts I made for this project. The bottom front of my saw raises. The Kreg plate has a reversible piece to compensate for flat or raising saw skid plate. The angle of my circular saw nose is greater than the piece can compensate for, that is, once titghten down, the saw does not sit flat on the bed of the plate. I wish there would have been an adustment for this. Nonetheless, i did absolutely not affect the accuracy of my cuts. When the plate is engaged on the track pointing away, the plate has a left to right play. I cannot explain why, but I achieved all my cuts without a flaw. I have to say that I was worried with this play at first. I made my cuts with a slight push of the saw to the left (toward the blue sacrificial plastic piece) Bottom line: this product is new, may benefit from a few minor improvements. Would I recommend it ? Absolutely yes. Hope this will help

     

By Nicolas Simard

July 31, 2017

A good shop addition

I already have the Rip-Cut, have always been impressed with the ease of use. I also have a shop-made edge guide for my circular saw that I would use for cross cuts. The Accu-Cut is a good replacement for the edge guide - for a couple reasons. The first reason is that I would often push the saw away from the edge guide when cutting, especially when trying to reach all the way across a 48" sheet of plywood. This is prevented on the Accu-Cut due to the rails that the saw sled rides on. The other reason that the Accu-Cut is superior to an edge guide is that it is easier to clamp down. I often struggled with finding ways to get a good clamp on an edge guide. The grip strips on the Accu-Cut held very well, and if needed to clamp I could use Rockler hold-down clamps that fit in the t-track underneath the Accu-Cut. I felt that $80 was a very fair price for the extra functionality that the Accu-Cut provides. It will be a nice addition the the Rip-Cut and will be a huge help in safely breaking down sheet goods. Perfect tool for a DIYer!

     

By Nik Guttormson

July 31, 2017

Theory Good, Compatibility Main Issue

I had high hopes for this product, but this product is incompatible with my Skil saw and incompatible with the one Kreg recommended (Makita). Notice that the description states that it works with "most" circular saws. My problem arose when I tried to mount the saw to the slider. The two swing arms, mounted with pointed bolts at their end mechanically interfere with Skil's levers and the worm drive. Thus, it is impossible to move the saw laterally across the sled. Furthermore, when I got it finally mounted with the front end of the saw squared with the front of the sled, and followed directions, the saw cut off the entire rubber extension protruding from the sides of the track. Tech support, very helpful indeed, told me not to be concerned since their purpose is only to minimize splintering. On page 3 of the manual, it tells you to cut off 1/32th of the rubber strip, which is impossible to do. So I went through the ordeal of returning the saw to the 3rd party that sells this saw on their web site. It took several messages to point out that the product was "defective and inoperable" (the category selected on advice from Kreg tech support). But I really wanted this product to work, so I cancelled the return and told them I was going to take the sled to the local HD store to ensure I could mount the new saw Ryobi with freedom to move the saw laterally. So I took this saw home and mounted it without any interference from Skil like parts experienced before. HOWEVER, another incompatibility was discovered. While the openings on the slider are about 1.125" (ample room for the spring loaded guard to swing through). This space is decreased by about 0.5" when one mounts the sled on the tracks groves. As such, there is not enough room for the spring loaded guard to swing through! ARRRG! So I'm returning the Kreg unit again. This time I will use an 8' level, clamped at both ends. Using hardwood like purple heart won't work as humidity changes. In case that the third party to Amazon refuses to accept my return, Amazon will cover the expense. My advice to Kreg is to list the names, models, and year of saws that will work for the benefit of their customers. I rate the product, documentation, and product description as 1 star, but I rate their Tech Support as a 5.

     

By Tim Townsend

July 26, 2017

Voir plus d'évaluations